Apply The Following In Order:
Clean-up
Definition Use: Clean-up is a product solvent solution that does a number of tasks when used within our car touch-up paint scratch removal kits. Remove impact residue (whatever hit your car left its mark or smear behind). Clean-up will only remove nitrocellulose or rubber residue along with road grime and other various types of industrial fallout. If the residue is enamel and cannot be removed then blemish remover or quick cut polish will be required. Clean-up/solvent is a high-grade paint thinner that is used to thin your factory exact match factory paint products & also is used for cleaning brushes, spills & others.
Procedure: Always check in an inconspicuous area first to make sure the part being repaired is not refinished in nitrocellulose paints. Apply a generous amount of clean-up to the work cloth that is included free in the paint kit. Hold the moistened work cloth against the repair area for a short second where the impact residue is visible. Proceed to massage the whole damaged area cleaning impact residue and other industrial fallout, swirls, and blemishes. If the clean-up does not remove the impact marks use blemish remover or quick cut polish.
Solvent Tips & Tricks: Solvent / Clean-up is the first step in any touch-up paint scratch or paint chip repair as it removes most residue transfer and prepares the repair area for the next step in repairing scratches & stone chips.
Blemish Remover
Definition Use: Blemish Remover is a very fine Sand Paper in a cream form and is used to prepare surface area for paint, and polish out light scratches, swirl marks & minor residue on the painted surface.
Procedure: Apply a generous amount of blemish remover cutting agent to the polish cloth. Massage the scratch and surrounding area removing minor residue and fine scratches caused by the impact of a foreign object. Polish until a high gloss is reached on and around the scratched paint. Note: If the Impact paint transfer Residue Will Not come Off, use the color to Camouflage. Please be aware that the Quick-Cut polish kit selection should be used if there is extremely heavy scratching in the paint.
Tips & Tricks: When light scratching can be seen on non-metallic paint surfaces always try to remove the scratch first without painting. Using our quick cut or blemish remover will enable you to polish out light scratching. Be generous with the cutting cream and be persistent with attempting to remove paint scratching.
We recommend repairing light scratching in the colour using the Blemish Remover or Quick-Cut 2 or 3 times. Once the colour has cured use the Blemish Remover to blend and level the new paint with the old and apply Top Coat Polish.
Paint Color
Definition Use: Brush Touch automotive colour product is used to camouflage and blend color into deep discolored scratches, chips & paint defects caused by the impact of an object where colour coats are completely removed and/or left paint transfer that is impervious to solvent & is too thick to remove using cream cutting agents. Note: If sanding is required then Aerosol spray should be used.
Procedure: Shake colour contents well. Remove the cap and squeegee brush. Check the colour is correct. Apply fill and blend 1 to 2 coats of colour Brush Touch color only to the fully discolored areas of damaged paint where the paint layers excluding the primers have been completely removed. If you apply excess paint to your scratch or chip use the clean-up to remove it. Allow 3 minutes of drying time in between coats in good weather. If you have impact residue that did not come off in earlier steps, apply one or two coats of colour directly on only the discoloured areas.
Paint Color Tips & Tricks: Always know your paint layers and make sure you're not touching up scratches with the incorrect paint product or the scratch will look just as bad as the original scratch. You can usually tell which layer the scratch is in when using the Solvent or Clean-up solution. As the solvent is applied it will give the area a wet look. While it is wet if the scratch disappears that usually means that your paint scratch is confined to the topcoat layer of the paint colour and Clear Gloss should be used.
Polishing Wax
Definition: Topcoat waxing polish is designed to color, protect, blend, and lustre your vehicle's paintwork in a uniform manner. (Do not apply wax polish in the direct sunlight)
Procedure: Apply a generous amount of polishing wax to the microfiber polishing cloth. Using a circular polishing action apply the polish to the entire panel and allow it to dry to a haze. Using a second microfiber cloth remove the applied wax.
Polishing Wax Tips & Tricks: Always wash your vehicle and allow it to dry before commencing waxing. Do not polish your vehicles and other items in the sun. Use our High-Grade Automotive Touch-Up Paint Top Coat Polish to seal, protect, lustre, blend, and finish to a high deep gloss finish
Clean-up
Definition Use: Clean-up is a paint solvent that cannot be used for a number of things when used in our acrylic and urethane base colour coat paint products. Remove impact residues & marks from car paint, thin paints, clean spillages, overfills, clean brushes, and more
Clean-up Tips & Tricks: Always wear protective clothing, gloves & eyewear, and use this product in a well-ventilated area, always test the product in an inconspicuous area first to be sure the area to be repaired is not affected by the cleaning and blending solvent. (2k acrylic urethane enamel is impervious to this product) in other words, this product will not affect your car body's original paint with all current makes & models. Do not use this product on unpainted plastic parts or interiors of your vehicles.