CAR BODY NON METALLIC TOUCH UP PAINT REPAIR KIT

2 Bottle Paint Scratch & Chip Metal Repair kit

This Paint kit is suitable for non metallic paint on body parts & other parts and panels made from steel. Do not use this kit on the car bumper bars as most car bumpers are made from plastic.

1) Restore metal primer to get better paint levels in the finish & promote adhesion between the steel panels or parts & paint layers.

2) Restore non metallic color that has been removed using original factory O.E.M exact match paint color.

Solid 2 Bottle Non Metallic Paint Car Body Kit Contents

INCLUDED:

*Non Metallic Color 15 ml

*Metal Primer 15 ml

 

GIFTS:

*Tool Caddie

*User Guide

 

How To Use Your 2 Bottle Paint Scratch & Chip Car Body Repair Kit

1) METAL PRIMER

Definition: Brush Touch Metal Primer is used to give better paint levels when touching up paint scratches & Chips, also protect and promote adhesion of top coat paint color layers on bare metal on vehicles where a foreign object on impact has removed factory paints.

Procedure: Shake primer contents well until the agitator can be heard bouncing around, remove cap and squeegee brush. Apply the metal primer on only the damaged area where Bare Metal is Showing. Do Not apply metal primer to any other part of the scratch including the light whitish looking scratches. Apply one to two coats directly into the paint chip or Clean cut scratch. Allow 3 minutes drying time in good weather.

Metal Primer Tips & Tricks: Pool the primer to bare metal chips and larger scratches without getting it on the good paint. Apply the primer only where it is missing and bare metal can be seen. Do not use metal primer on plastic parts unless the plastic primer adhesion promoter has been applied first.

 

2) PAINT COLOR

Definition: Brush Touch Non Metallic Paint Color is used to cover deep discolored scratches, chips & paint defects caused by impact of an object where color coats are completely removed and/or left paint transfer that is impervious to solvent & is to thick to remove using cream cutting agents.

Procedure: Shake color contents well. Remove cap and squeegee brush. Check the color is correct. Apply color only to the fully discolored areas of damaged paint where the paint layers including the color coat has been completely removed. Allow 3 minutes drying time in between coats in good weather.

Paint Color Tips & Tricks: Always know your paint layers and make sure your not touching up scratches with the wrong material or the scratch will look just as bad as the original scratch.

Paint Scratch Test: You can usually tell which layer the scratch is in by using a Solvent or Clean-up solution. As the solvent is applied it will give the area a wet look. While it is wet if the scratch disappears that usually means that your paint scratch is confined to the top coat layer of the paint and may possibly be removed with out using paints & colors.

COMPLETE NON METALLIC 2 BOTTLE TOUCH-UP PAINT MASTER USER BODY REPAIR GUIDE BY WWW.CARTOUCHUPPAINT.COM.AU