HOW TO USE YOUR 3 PEN PAINT SCRATCH & CHIP RUSTING CAR BODY REPAIR KIT
1) NON METALLIC STOP RUST PEN
Stop rust pen is used to treat and stop the progression of rust.
Remove metal primer cap and discharge the initial amount to rubbish by pressing the pen down in an upright position and squeezing the pen body slightly. Apply rusted only to the rusted areas. The rusted product will dry to a dark purple/black color & should be dry enough to apply the metal primer. Allow 4 hours in good weather
Stop Rust Tips & Tricks:
Remove scaly rust & apply blemish remover before applying stop rust. Do Not Apply Rusted To Good Paint As It Can Only Be Removed With Sanding. Always wear eye glasses and gloves when using this product.
2) NON METALLIC METAL PRIMER PEN
Metal primer pen is used to give better paint levels when touching up paint scratches & Chips, also protect and promote adhesion of top coat paint color layers on bare metal on vehicles where a foreign object on impact has removed factory paints.
Remove metal primer cap and discharge the initial amount to rubbish by pressing the pen down in an upright position and squeezing the pen body slightly. Apply 1 to 2 coats to the bare metal only. Allow to dry for 3 minutes in between coats in good weather.
Metal Primer Tips & Tricks:
Pool the primer to bare metal chips and larger scratches without getting it on the good paint. Apply the primer only where it is missing and bare metal can be seen. Do not use metal primer on plastic parts unless the plastic primer adhesion promoter has been applied first.
3) NON METALLIC COLOR PAINT PEN
Non metallic paint color pen is used to cover deep discolored scratches, chips & paint defects caused by impact of an object where color coats are completely removed and/or left paint transfer that is impervious to solvent & is to thick to remove using cream cutting agents.
Remove cap and discharge the initial amount to rubbish by pressing the pen down in an upright position and squeezing the pen body slightly. Apply 1 to 2 coats to the damaged area where the color has been completely removed. Allow to dry for 5 minutes in good weather in between coats.
Paint Color Tips & Tricks:
Always know your paint layers and make sure your not touching up clear scratches with color or the scratch will look just as bad as the original scratch. You can usually tell which layer the scratch is in when using the Solvent or Clean-up solution. As the solvent is applied it will give the area a wet look. While it is wet if the scratch disappears that usually means that your paint scratch is confined to the top coat layer of the paint and Clear Gloss should be used.
COMPLETE NON METALLIC 3 PEN TOUCH-UP PAINT MASTER USER RUSTING BODY REPAIR GUIDE WWW.CARTOUCHUPPAINT.COM.AU